FILL CHART
| Wire Hider Raceway | n/a |
n/a |
1/2 inch Series |
1 inch Series |
1-1/2 inch Series |
||||
| Raceway On-A-Roll | 1/4 inch |
3/8 inch |
1/2 inch Series |
1 inch Series |
1-1/2 inch Series |
||||
| Cable / Wire Size | Category/Designation | 40% |
40% |
20% |
40% |
20% |
40% |
20% |
40% |
Telephone |
2-Pair, 24 AWG |
1 |
1 |
2 |
4 |
4 |
8 |
10 |
21 |
3-Pair, 24 AWG |
0 |
1 |
1 |
3 |
3 |
7 |
9 |
18 |
|
4-Pair, 24 AWG |
0 |
0 |
1 |
2 |
2 |
4 |
5 |
11 |
|
25-Pair, 24 AWG |
0 |
0 |
0 |
0 |
0 |
1 |
1 |
2 |
|
Coaxial |
RG58/U |
0 |
1 |
1 |
2 |
2 |
4 |
5 |
11 |
RG59/U |
0 |
0 |
0 |
1 |
1 |
2 |
3 |
7 |
|
RG62/U |
0 |
0 |
0 |
1 |
1 |
2 |
3 |
7 |
|
RG6/U |
0 |
0 |
0 |
1 |
1 |
2 |
2 |
5 |
|
Twinaxial |
100 Ohm |
0 |
0 |
0 |
0 |
0 |
1 |
1 |
3 |
Shielded
Twisted Pair |
Type 1 |
0 |
0 |
0 |
0 |
0 |
1 |
1 |
3 |
Type 2 |
0 |
0 |
0 |
0 |
0 |
0 |
1 |
2 |
|
Type 3 |
0 |
0 |
0 |
1 |
1 |
2 |
3 |
8 |
|
Fiber Optic |
Two Strand (Duplex)
"Multimode,
62.5/125um" |
0 |
1 |
1 |
2 |
2 |
4 |
5 |
11 |
PREMIERE MATERIALS AND PRODUCT DESCRIPTION
| WIRE HIDER Base Channel |
Two Piece Raceway System with Flexible Flaps that grip wires/cables during installation Mat'l: Rigid PVC UL94VO Flame Retatrdant listed material - UV Stabilized |
| 1/2 inch Series | Inside Dimensions: 0.475 W x 0.474 H |
| 1 inch Series | Inside Dimensions: 1.085 W x 0.545 H |
| 1-1/2 inch Series | Inside Dimensions: 1.500 W x 0.687 H |
| WIRE HIDER Cover Lid |
Rigid PVC UL94VO Flame Retardant listed material - UV Stabilized latex Paintable |
| 1/2 inch Series | Outside Dimensions: 0.645 W x 0.535 H |
| 1 inch Series | Outside Dimensions: 1.225 W x 0.605 H |
| 1-1/2 inch Series | Outside Dimensions: 1.687 W x 0.875 H |
| Raceway-On-A-Roll |
Single Piece Raceway System manufactured in 50 ft and 100 ft Rolls Material: Rigid PVC UL94VO Flame Retardant listed material - UV Stabilized - latex paintable |
| 1/4 inch Series | Inside Dimensions: 0.255 W x 0.125 H |
| 3/8 inch Series | Inside Dimensions: 0.375 W x 0.375 H |
| 1/2 inch Series | Inside Dimensions: 0.475 W x 0.474 H |
| 1 inch Series | Inside Dimensions: 1.085 W x 0.545 H |
| 1-1/2 inch Series | Inside Dimensions: 1.500 W x 0.687 H |
| Cat 5 Accessories |
Mat'l: ABS UL94VO/5A Flame Retardant listed material - UV Stabilized - latex paintable |
Accessories available for the following sizes: 1/2 inch, 1 inch and 1 1/2 inch Series
Accessories offered: Inside / Outside Corners - Right Angles - End Caps - Reducers - Surface Mount Box Adapters - Tee's
All accessories interface with all WireHider Raceway sizes, and Raceway On-A-Roll, 1/2"" and 1"" sizes
Important Notes:
All base raceway items are supplied with adhesive foam tape on the bottom surface for the initial positioning of the raceway.
U.L. requires Mechanical Fastening, using the appropriate fastener inserted every 6 to 8 inches.
This chart is to be used as a guide for the referenced cable/wire size catagories. The end user will be responsible for ensuring that recommended fill-rates are not exceeded.
Our products are warranteed to be free from defects in workmanship and materials, and it is understood that users will test them to determine use suitability. Our only obligation will be to replace any defective product(s) and not to be liable for any loss, or damage, arising from the use, or misuse, of the product.
Copyright 2006 Premiere Raceway Products, Inc. Made in USA all rights reserved.